Have you been driving, and your driving seat recliner suddenly falls back? Having to deal with this can be very frustrating, especially if it happens while you’re driving. This issue can often cause the driver to lose balance and can be dangerous when trying to make turns.
In this blog post, we’ll show you how to fix driver seat recliner so that this doesn’t happen again. Continue reading to learn about some of the potential solutions to this problem
Table of Contents
Step By Step Guide On How To Fix Driver Seat Recliner:
Below are some steps that you can follow to fix your driver seat recliner:
Step 1: (Removing Screws on the Backside)
You should focus on removing your seat’s backside rather than going ahead and removing your entire seat. There should be two screws holding the seat back in place, generally located on the lower side, and use a screwdriver to remove them both.
For the removal, make sure you start from the right side first, as it will allow you to access the splined shaft behind.
It is essential to remove the right bolt first so that you can grab the bar that is attached to the shaft. This will ensure that the left side doesn’t fall off when you take out the second bolt.
Make sure you do not unscrew the left side first, as it can cause complete removal of the shaft, which can cause trouble while putting it back.
Step 2: (Put Glue on the Spline Shaft)
What Type of glue to use for this step? For this step, you can use a strong adhesive that can hold the weight. If you want to be on the safe side, it’s better to go for an option that can be easily removed later in case you need to.
Once you have decided which glue you will use, apply it to the spline shaft.
What is the purpose of applying glue to the shaft? In this case, the function is to connect the spline shaft to the other shaft. This will ensure that it doesn’t come out again and will give the seat more strength.
Make sure you apply a generous amount of glue so that it can hold the weight of the person sitting on it.
Step 3: Push onto the Nips
This is the 3rd step in our guide on how to fix the driver seat recliner. For this step, use a flat-headed screwdriver and an appreciation for hands-free operation. Then carefully remove any obstructions from the nips by pushing them all the way into place but avoid blocking any other components along their length or breadth if possible so as not to cause problems later down.
Failing that— try pushing it back from the front side while someone holds the screwdriver. It should be easy enough for even those new at repairs like myself; don’t overdo the force because otherwise, things can fall apart quickly here, and seat can be further into problem 🙂
Step 4: Install the New Shaft
In the 4th step, you must attach the new shaft to the front seat. For this, first, ensure that the replacement you purchased is a bit longer than the one you previously owned, and I recommend measuring it to be on the safe side.
This is because the new shaft should be leveled with the sides of the seat. This will make sure that it can be attached firmly on both sides and will not come out easily.
If not aligned correctly with sides or falls over the bar – voila: the same problem as the previous owner again!!
To avoid such problems, take your time while attaching the new shaft and ensure it is level with the sides of the seat.
Step 5: (Reattach the Backside)
Now all you have to do is put back the backside of the seat and screw in both bolts that you removed in step 1. Once you have done that, your driver seat recliner should be as good as new, and you won’t have to worry about it coming out again.
Step 6: (Test The Driver’s Car Seat)
To make sure that your driver’s seat is secure, test it out by sitting on it and moving around a bit. If everything is good, then you are all set. But if you feel like the seat is loose, go back to step 5 and ensure that both bolts are correctly tightened.
In addition, If you hear a scratching or metal clashing together, the new shaft is not level with the seat, and you will have to go back to step 4.
Final Words: If you followed all the steps correctly, your driver seat recliner should be as good as new, and you won’t have to worry about it coming out again. Make sure you don’t overdo the force while pushing the nips in place in step 3, and you should be fine.
Tip: It is best to get professional help if you are not confident about doing this yourself or if you don’t have the required tools. For more information, you can check the forum discussion related to fixing driving seat by clicking here!
Additional Tips And Tricks While Fixing The Driver Seat Recliner
The above mention step may not be sufficient in some cases. In such cases, it is recommended to get professional help as they will have the required tools and experience to fix the problem.
If you are still not confident about doing this yourself, you can get help from a friend or family member who is experienced in such matters.
For more tips and tricks while fixing the driving seat recliner, below are some tips you can follow and happy DIYing.
1. Rotate the Bolts
It is the most important tip when fixing the driver’s seat recliner. Many people mistake not rotating the bolts while installing the new shaft, which can cause the seat to become loose over time and eventually lead to the same problem.
Make sure you rotate the bolts in a clockwise direction while attaching the new shaft. As a result, the seat will be securely fastened and will not be easily removed.
2. Do Not Overdo The Force:
Many people mistake overdoing the force while pushing the nips in place, and this can cause the new shaft to become loose over time and eventually lead to the same problem again.
Thus, while pressing the nips in place, be cautious not to overdo the force.
3. Grease the Shaft
It is always a good idea to grease the shaft before attaching it to the seat, and this will make sure that the seat moves smoothly and does not make any noise. In addition, it is also a good idea to grease the bolts before attaching them, ensuring they do not get stuck and are easy to remove when required.
This is the end of our guide on “How to fix driver seat recliner?”. We detailedly explained each and every step that you need to follow in order to fix the problem. We also provided some additional tips and tricks that you can use while fixing the driving seat recliner chair.
Hope you found this guide helpful and that you were able to resolve your issue successfully. Please leave any questions or comments below.
How to Find the Bolts on the Backside of the Seat?
There are different types of driving car seats, each with its own unique design. The good news is that bolts are usually located below the bottom of the seat on the backside. However, they may sometimes be mounted on the side or under the seat.
To find the bolts, you will need to use your hands and feel around the backside of the seat. You might also have to use a flashlight to see in the dark corners. After finding the bolts, you can move on to the next step.
How do you fix a stuck car seat recline?
If you have a car seat that is stuck in the reclined position, there are a few things you can try to shake it loose. First, try giving the seat a good shake, and this may dislodge whatever is causing the problem. If this doesn’t work, you can try using a bit of force. Try pushing or pulling on the seat to see if you can get it to move.
Finally, check the locking mechanism to see if something is blocking it. If you can’t find the cause of the problem, you may need to take the seat apart to check for damage.
Can you manually recline a power car seat?
Yes, you can recline a power car seat manually. However, it is generally not recommended to do so. Reclining a power car seat manually can put unnecessary strain on the motor and other components, which may cause damage or shorten the lifespan of the seat.
To manually recline a power seat, you must lift up the seat and disconnect any reclining motors. Then, with the help of a fitting insert, turn the backrest manually.
You Can Also Read:
- How To Clean Leather Reclining Chair? (Complete Guide)
- How To Cover A Recliner? Let’s Find Out!
- How To Add Wheels To A Recliner? Learn Professional Approach!
For Information like this, visit Our Site completely!