Are you trying to figure out how to remove the back of a Flexsteel recliner? This guide will show you how to disassemble the back of a Flexsteel reclining chair, whether you need to repair it or just clean it. It isn’t as complicated as it appears, but there are a few important elements to remember. So keep reading to learn how to do it perfectly!
We’ll also give you some pointers on how to make the procedure go more smoothly. But first, let me give you a brief introduction to Flexsteel furniture and its significance in your home.
Flexsteel is a leading manufacturer of quality upholstered furniture. The company offers a wide variety of furniture styles and has been in business for over 125 years. The company’s product line includes sofas, loveseats, chairs, recliners, and ottomans. Flexsteel also provides a line of sleeper sofas and sectionals.
Flexsteel furniture is known for its comfort, durability, and style. The company’s products are available in various fabrics and leathers, and they come in a wide range of colors. Flexsteel furniture comes in a wide range of sizes to fit any room in your house. The company’s products are manufactured in the United States and are sold through authorized retailers such as Amazon and Wayfair.
Table of Contents
What Is Flexsteel Loveseat Recliner
The Flexsteel Loveseat Recliner is a versatile piece of furniture that can be used in many ways. It can be used as a traditional loveseat or reclined to provide additional comfort and support. The Loveseat Recliner has many features that make it ideal for various settings.
Step By Step Guide On How To Remove The Back Of A Flexsteel Recliner
Step 1 (Unplug your recliner if it’s an electric one)
If you have an electric Flexsteel recliner, turn off the power before starting. By doing so, you will prevent accidents from happening.
Step 2 (Remove the back of the recliner depending on the type)
The back of your Flexsteel recliner may be attached differently, depending on the model. The most common methods are screws, clips, or snaps.
- If your recliner has screws, you’ll need a screwdriver to remove them. Keep track of where each screw goes so you can put them back later.
- If you don’t see any screws, there may be clips holding the back in place. They can be found near the bottom of the backrest. Pry them out with a flathead screwdriver.
Once the screws or clips are removed, you should be able to take the back off of the recliner. If it’s still stuck, wiggle it back and forth until it frees itself. Again, keep track of where each piece goes to put it back together correctly later.
Step 3 (Depending on the type of Flextseel recliner you have, remove other parts carefully)
Now that you have the back-off, you may be able to see other parts that can be removed for cleaning or repairs.
-If your recliner has a removable seat cushion, take it out and set it aside. This gives you greater access to the inner workings of the recliner.
-The armrests may also be removable. If they are, unscrew or unclip them and set them aside as well.
With the back and other parts removed, you should now have full access to the inner workings of the recliner. You can now proceed with repairs or cleaning as needed.
Once you’re finished, reassemble the recliner by reversing the process. Ensure all screws are tightened and clips are securely in place before using the recliner again.
Things To Avoid While Removing The Back Of Flexsteel Recliner
Here are a few things to avoid while removing the back of your Flexsteel recliner:
- Don’t force anything. If a part is stuck, try wiggling it back and forth until it releases.
- Make sure you don’t lose any little bits. Keep track of where each screw and clip goes so that you can put them back in the right place later.
- Don’t use sharp objects on the recliner. A screwdriver is usually all you’ll need to remove screws and clips. Try using a butter knife or another flat instrument if something appears to be stuck.
- While working with the recliner, be sure not to damage any wires or other parts. If something feels loose, check the owner’s manual for guidance.
If you follow these steps, you should be able to remove the back of your Flexsteel recliner without any problems.
Conclusion:
In conclusion, I hope that this blog post based on the title “How To Remove The Back Of A Flexsteel Recliner” has helped clarify the process. While removing the back of a Flexsteel recliner is relatively simple, there are a few things to keep in mind to avoid damaging the recliner.
In case you are unsure about any aspect of the process, you should always seek professional advice before proceeding. Once the back is removed, you can then proceed to unscrew or unclip the other parts of the recliner.
After you’ve removed all of the pieces, you can move the recliner around as desired. Simply reverse the method to reassemble the Flexsteel recliner after you’re finished. Before using the recliner again, double-check that all screws and clips are properly fastened.
With these tips in mind, you should be able to remove the back of your Flexsteel recliner with ease. Thanks for reading!
FAQs
How do I remove the back of my Flexsteel recliner?
The back of a Flexsteel reclining chair can be removed by unscrewing or unclipping the screws or clips that keep it in place. A screwdriver or flathead screwdriver may be required to remove the screws or clips.
Once you’ve removed them, you should be able to remove the back of the recliner. If it still won’t come off, try wriggling it back and forth. Keep track of where each component is so you can reassemble it correctly later.
Do I need professional help to remove the back of my Flexsteel recliner?
No, you should not need professional help to remove the back of your Flexsteel recliner. However, if you are unsure about any part of the process, it is always wise to consult with a professional before proceeding.
How do you move a Flexsteel recliner?
The best way to move a Flexsteel recliner is first to take apart the back and dismantle it. This will allow you to access the inner workings of the recliner and make it easier to move.
Once the back is removed, you can then proceed to unscrew or unclip the other parts of the recliner. As soon as all the parts are removed, you can move the recliner as needed.
When you’re finished, reverse the process to reassemble the recliner. Ensure all screws are tightened, and clips are securely in place before using the recliner again.
You Can Also Read:
