How To Replace Power Recliner Switch? (Guide) – 2022

Your power recliner is one of the most important pieces of furniture in your home, and when the switch goes out, it can be a major inconvenience. 

Fortunately, replacing the switch is quite simple, but there are a few things to consider. Our goal in this blog is to give you step-by-step instructions on how to replace power recliner switch and to provide tips on how to make the process easier. Read on for more information!

How To Replace Power Recliner Switch: A Step-By-Step Guide

Below is a step-by-step guide to replacing a power recliner switch. This guide is easy to follow and won’t take much of your time.

Step 1 (Unplug Power Source)

First, you need to disconnect the power source of your recliner. If it’s plugged into an outlet, simply pull the plug out. Once the power is off, move to step 2, where you have to place your recliner in a wide space for easy work.

Step 2 (Place Your Power Recliner in Wide Space)

After you have disconnected the power source, it’s time to place your recliner in a wide-open space. This will give you plenty of room to work and prevent any accidental damage to your furniture. Once your recliner is in a safe place, lean it back so that you can reach the switch. Then locate the switch on your recliner and remove the cover plate.

Step 3 (Remove the Old Switch)

It’s time to replace your old switch with a new one. To do this, start by taking off the cover of the switch. Once the cover is removed, you will see screws holding the switch in place. Use a screwdriver to remove these screws and carefully pull out the old switch. The screwdriver that you will use will be a Phillips head.

Step 4 (Disconnect the 5-prong plug from the motor unit)

Carefully lean the recliner back until you see the 5-prong plug connecting the motor unit to the switch. This plug is usually located near the bottom of the recliner. Use your fingers to disconnect the plug and then set it aside.

Step 5 (Document The Steps)

When the old switch is out, look at the wiring to see where it’s supposed to be. This will make it easier to install the new switch. Once you understand how the switch works, take a photo of it or make a sketch so that you can reference it later. This will save you a lot of time and frustration when installing the brand-new switch.

Step 6 (Install New Power Cord)

In this step, you need to remove the old switch. To do so, you must take off the cover of the switch. After removing the cover, you will be able to see the screws that hold the switch in place. Remove the screws, and you can now carefully pull the switch from its mounting. The screwdriver that you will use will be Phillips’s head.  

Step 7 (Reconnect the power source and Test)

Now, you must reconnect the power source to your recliner and test out the upgraded switch. If everything works correctly, your recliner should be operational again.

These steps will enable you to effortlessly replace your power recliner switch. Nevertheless, it is always prudent to consult with a professional if you encounter any problems or are unsure of something. They will be able to help you troubleshoot the problem and get your recliner operational quickly.

Things To Keep In Mind While Replacing The Power Recliner Switch

There are a few things that you should avoid while replacing the switch on your power recliner.

  1. First, be sure to disconnect the power source before you begin working. This will prevent any accidental electrocution.
  2. Second, be careful not to damage the wires when removing or installing the new switch.
  3. Third, make sure you reference your documentation from step 4 to know which wires go where.

These simple tips will help ensure your switch replacement goes smoothly and without any problems.


Changing the switch on your power recliner is a relatively easy task you can do on your own. You just need to follow these steps carefully and take your time. Your recliner will work like new again if you’re patient.

We hope that this post has provided you with all the information you need to replace a power recliner switch.

Please share it with your friends and family members who may need to replace their power recliner switch. Thanks for reading our article based on how to replace power recliner switch!


My recliner is not working after I replaced the switch. What could be the problem?

There are a few possibilities. The first thing to make sure is that the power source is plugged in and the switch is turned on. If the problem persists, consult with a professional to troubleshoot the problem.

I accidentally cut one of the wires when I was removing the old switch. What should I do?

If you accidentally cut a wire, you will need to consult with a professional. They will be able to splice the wire so that it is properly connected.

You Can Also Read:

Sharing Is Caring:

Having worked on 100+ blogs since 2015, Emma Brown is now an author for She's passionate about helping homeowners find their perfect recliner. Emma has written about her experiences with recliners for Recliners Comfy.

Leave a Comment