This guide will teach you how to assemble a power recliner sofa step-by-step, along with other relevant details you need to know. There is no doubt that a power recliner sofa is a great way to improve your living room’s comfort.
The assembling process of a recliner isn’t that difficult, but you need to keep a few things in mind. So, if you have just purchased one of these recliners or are considering it, keep reading!
We will begin by opening the box and examining its contents. Next, we will show you how to attach the backrest. Following that, we will explain how to connect the electrical components and plug in the power cord. Finally, we will discuss how to adjust the settings on your power recliner sofa.
Table of Contents
How To Assemble A Power Recliner Sofa in 4 Easy Steps
1. Unpack And Check The Contents.
When you receive your power recliner chair, you will find it in a large box. Carefully unpack it and make sure that all the parts are present. There should be a backrest, a base, and an electrical component kit. If any of these parts are missing, contact the retailer immediately.
2. Attach The Backrest.
Attach the backrest to the base of the power recliner. There are usually locks on the back of the recliner, which you will need to slide over the rails of the mechanism. Make sure that the locks are securely in place before moving on.
3. Connect The Electrical Components.
The next step is to connect the power recliner’s electrical components. This is a relatively simple process but read the instructions carefully before beginning. Once all the components are connected, plug in the power cord and turn on the sofa.
4. Adjust The Settings.
Finally, take some time to adjust the settings of your power recliner sofa. You can usually do this by using a remote control or pressing a button on the side of the recliner sofa. Experiment with different settings until you find the perfect position for you.
Now that you know how to assemble a power recliner sofa, it’s time to enjoy your new piece of furniture!
If you’re still not sure how to correctly assemble a power reclining chair, watch the video below for an explanation.
Things To Avoid While Assembling Power Recliner
There are a few things to avoid when assembling a power recliner. These include:
- Do not put too much weight on the sofa while assembling it. This could damage the mechanism.
- Take care not to pinch your fingers when attaching the backrest or connecting the electrical components.
- Keep the wiring away from the mechanism. This could cause a short circuit.
- You should not use power tools when assembling the recliner. This could damage the electrical components.
- Prior to starting, read the instructions very carefully.
By following these simple tips, you can avoid any problems while assembling your power recliner sofa.
How Do I Care For My Power Recliner Sofa?
Cleaning your power reclining sofa is relatively easy. Just vacuum it regularly to remove dust and dirt. If the upholstery is starting to look worn, you can use a mild detergent to spot clean it. Do not use harsh chemicals or abrasive cleaners on the recliner, which could cause damage to the upholstery.
Do All Power Reclining Sofas Come Apart?
No, not all power reclining sofas come apart. Some models are designed to be disassembled and have detachable seat backs secured by locking levers for easy transport or storage, but others are not.
How Much Space Does A Power Reclining Sofa Need?
A power reclining sofa needs around 1 foot of space behind it to recline fully. This is because the backrest needs to tilt backward, and the footrest needs to extend outwards. Keep this in mind when placing your power recliner in a room.
Will My Power Recliner Sofa Fit Through My Doorway?
This will depend on the size of your sofa and the size of your doorway. Most power reclining sofas are between 40-45 inches wide, so you’ll need to measure your doorway to see if it’s large enough to accommodate the furniture.
If you’re still uncertain, it’s always a good idea to disassemble the power recliner sofa before moving. This way, you can be sure that it will fit through the door without any problems.
How Do I Separate A Power Recliner Sofa?
The process is relatively simple if you have a power reclining sofa that comes apart. Just unlock the levers on the back of the recliner and remove the backrest. Then, disconnect the electrical components and carefully lift the base out of the frame. It should not take more than a few minutes.
These simple steps will make it easy to disassemble your electric recliner sofa.
How Do You Take Apart A Lazy Boy Power Recliner?
If you need to take apart a Lazy Boy power recliner, first locate the locking levers on the back of the sofa. These are usually located just below the armrests. Once you have found the levers, pull them up and outwards to release the backrest.
The backrest can then be lifted off of the frame. To reassemble the sofa, insert the seat back into the frame and push down on the locking levers to secure it.
What Is The Difference Between A Standard Recliner And A Power Reclining Sofa?
The most significant difference between an ordinary recliner and a power reclining sofa is the mechanism. Power recliners have an electric motor that allows them to recline at the push of a button, while standard recliners must be manually pushed back into place.
Power recliners often have more features than regular recliners, such as massage and heat functions. Finally, power recliners generally cost more than traditional recliners.
Conclusion
Assembling a power recliner sofa is a relatively simple task that can be completed in just a few steps. Just make sure to read the instructions carefully and take care not to damage any of the components. With a little bit of care, your power recliner sofa will last for many years!
In the end, I hope this guide was able to help you understand how to assemble a power recliner sofa. If you have any other questions feel free to ask in the comments below. Thanks for reading!
You Can Also Read: